Aesthetic Bracket Remover Pliers - Orthometric

Aesthetic Bracket Removal Pliers

Code: 75.01.0003

The Aesthetic Bracket Removal Pliers feature a specific design, consisting of two active grooved tips.
The principle of using the Aesthetic Bracket Removal Pliers - Orthometric involves fixing the aesthetic bracket between the tips and establishing additional support for the archwire in the grooves found on the active tips.
Using traction, the accessory is removed, reducing the risk of fracture and providing greater safety during the procedure.

Features:

• The process for reusing pliers involves seven basic and fundamental steps: disinfection, pre-cleaning, rinsing, drying, visual inspection, packaging and sterilization.
  
• Disinfection prior to washing the pliers must be done with a suitable chemical agent.
  
• Cleaning aims to remove dirt in order to reduce the microbial load, organic matter and other contaminants, thus ensuring the maintenance of the instrument's useful life.
  
• After cleaning the pliers, they should be carefully rinsed in clean, running water.
  
• Drying aims to avoid moisture interference in the sterilization process and increase its effectiveness, and should be done after washing.
  
• Check the effectiveness of the cleaning process and the integrity of the pliers. If necessary, clean them again.
  
• Strictly clean and dry materials should be packaged in packages made of materials that allow steam to pass through, with surgical-grade paper being the most recommended. Before sterilization, the material must be packaged and labeled.
  
• The sterilization process aims to destroy or eliminate all forms of microbial life present, and is recommended to be carried out using an autoclave, for 30 minutes at a temperature of 121°, or for 60 minutes at a temperature of 170°.
  
• Each pliers was developed to perform a specific function, therefore, if it is not used to perform the normal working conditions for which it was designed, its useful life may be reduced or it may become damaged.

Approximate dimensions and weights

• With factory packaging:
  Dimensions: (8.0 x 2.0 x 17.00) cm
  Weight: 110g

ANVISA Registration: 80328810069

Manufacturer: Orthometric